Neutral Grounding Resistor

  • Specification
  • Typically System Voltage 480V, 2.4kV, 4.16kV, 7.2kV, 11kV, 13.8kV, others on request.
    Typically Rated Voltage 277V, 1390V, 2400V, 4160V, 6360v, 8000V, others on request.
    Typically Frequency 50Hz ~ 60Hz, others on request.
    Typically Rated Current 5A, 10A, 15A, 25A, 50A, 100A, 200A, 400A, 600A, 800A, 1200A, others on request.
    Rated Resistance @25℃ Depends on the rated voltage and current, or specified by customers.
    Rated Time 10 sec
    Temperature Rise @10 Second Ratings 760℃
    Temperature Coefficient ±350ppm/K
  • Series:
  • Brand: ZENITHSUN
  • Description:

    ● ZENITHSUN Neutral Grounding Resistors are designed to provide added safety to industrial distribution systems by limiting ground fault current to reasonable levels.
    ● In a typical solidly grounded four wire system, the neutral is tied directly to earth
    ground. This can cause high ground fault current (typically 10,000 to 20,000 amps) and excessive damage to transformers, generators, motors, wiring, and associated equipment.
    ● Inserting a ZENITHSUN Neutral Grounding Resistor between neutral and ground limits fault current to a safe level (typically 25 to 400 amps) while still allowing sufficient current
    flow to operate fault clearing relays. Limiting fault current also reduces the problem of transient overvoltages (up to six times normal voltage) which can occur during arcing type ground faults.
    ● Compliance with standards:
    1) IEC 60529 Degrees of Protection Provided by Enclosures
    2) IEC 60617 Graphical Symbols and Diagrams
    3) IEC 60115 fixed resistor for use in electronic equipment
    ● Installation environment:
    Installation Height: ≤1500 meters ASL,
    Ambient Temp: -10℃ to +50℃ ;
    Relative Humidiry: ≤85%;
    Atmospheric Pressure: 86~106kPa.
    The installion place of load bank should be dry and ventilative. There is no flammable, explosive and corrosive materials around load bank. Due to resistors are heaters, the temperature of the load bank will be higher and higher, there should be leave some space around the load bank, avoid the influence of outside heat source.
    ● Please note custom designs may be available. Please speak to a member of our sales team for more information.

  • Quality Management System Certification

    Product Report

    • RoHS Compliant

      RoHS Compliant

    • CE

      CE

    PRODUCT

    Neutral Grounding Resistor

    20kW 125V DC Load Bank

    High Voltage Load Bank

    Container Load Bank for Generator

    Braking Resistor Bank

    AC Load Bank

    400A 10.4Ohm Neutral Grounding Resistor

    CONTACT US

    We want to hear from you

    High end thick film high-voltage resistor brand in South China District, Mite Resistance County Integrating research and development, design, and production